Got the shell flush-cut. I used a 1/2″ tall plywood frame, bolstered by 3/32″ balsa or basewood to yield an approximate .1″ lip once the frame is reinstalled. Putting a 1/2″ block yields a ~.35″ gap as seen. So the mid frame will need to be a tiny bit thicker. The back got a little nick from some bit-chatter, hopefully that will putty up.

The store pictures had the large notch displayed, but I ended up with the modern sized notch. Any ideas where to get those larger notched chips? * Also, due to a mistake (socket quantity versus chip quantity) I ended up with 100 extra 14pin chips. So, I guess if anyone wants them I can set up a post in the forums junkyard once I mount up what I need.

When suddenly. Chips. Chips everywhere.

So, quick question: What is the typical distance that the greebiles are mounted from their respective ledges ? (See pic) Hopefully I didn’t overlook this in the files.

Just came in! Thanks Darren! These things are huge.